LINKTYPE_NFC_LLCP
Packet structure
+---------------------------+ | Adapter Number | | (1 Octet) | +---------------------------+ | Flags | | (1 Octet) | +---------------------------+ | Payload | . . . . . .
Description
The adapter number field identifies the interface on which the frame was recorded. On single-interface systems, this will typically be 0.
The bits in the flags field are:
0x01
- Direction (0=RX, 1=TX)0x02
-0x80
- Reserved
The payload is an NFC Logical Link Control Protocol (LLCP) PDU, as specified by NFCForum-TS-LLCP_1.1, i.e. a byte containing the DSAP and upper two bits of the PTYPE, followed by a byte containing the lower two bits of the PTYPE and the SSAP, followed by the sequence byte if the frame has sequence numbers, followed by any additional bytes of payload.